MC56F8023 Datasheet PDF - Freescale

56F8023 Description

●The 56F8023 is a member of the 56800E core-based family of Digital Signal Controllers (DSCs). It combines, on a single chip, the processing power of a DSP and the functionality of a microcontroller with a flexible set of peripherals to create an extremely cost-effective solution. Because of its low cost, configuration flexibility, and compact program code, the  56F8023 is well-suited for many applications. The 56F8023 includes many peripherals that are especially useful for industrial control, motion control, home appliances, general-purpose  inverters, smart sensors, fire and security systems, switched-mode power supply, power management, and medical monitoring applications.

●56F8023 Features

●Digital Signal Controller Core

●• Efficient 16-bit 56800E family Digital Signal Controller (DSC) engine with dual Harvard  architecture

●• As many as 32 Million Instructions Per Second (MIPS) at 32MHz core frequency

●• Single-cycle 16 × 16-bit parallel Multiplier-Accumulator (MAC)

●• Four 36-bit accumulators, including extension bits

●• 32-bit arithmetic and logic multi-bit shifter

●• Parallel instruction set with unique DSP addressing modes

●• Hardware DO and REP loops

●• Three internal address buses

●• Four internal data buses

●• Instruction set supports both DSP and controller functions

●• Controller-style addressing modes and instructions for compact code

●• Efficient C compiler and local variable support

●• Software subroutine and interrupt stack with depth limited only by memory

●• JTAG/Enhanced On-Chip Emulation (OnCE) for unobtrusive, processor speed-independent,  real-time debugging

●Memory

●• Dual Harvard architecture permits as many as three simultaneous accesses to program and data memory

●• Flash security and protection that prevent unauthorized users from gaining access to the internal Flash

●• On-chip memory

●  — 32KB of Program Flash

●  — 4KB of Unified Data/Program RAM

●• EEPROM emulation capability using Flash

●Peripheral Circuits for 56F8023

●• One multi-function six-output Pulse Width Modulator (PWM) module

●— Up to 96MHz PWM operating clock

●— 15 bits of resolution

●— Center-aligned and edge-aligned PWM signal mode

●— Four programmable fault inputs with programmable digital filter

●— Double-buffered PWM registers

●— Each complementary PWM signal pair allows selection of a PWM supply source from:

●  – PWM generator 

●  – External GPIO

●  – Internal timers

●  – Analog comparator outputs

●  – ADC conversion result which compares with values of ADC high- and low-limit registers to set PWM output

●• Two independent 12-bit Analog-to-Digital Converters (ADCs)

●— 2 x 3 channel inputs

●— Supports both simultaneous and sequential conversions

●— ADC conversions can be synchronized by both PWM and timer modules

●— Sampling rate up to 2.67MSPS

●— 16-word result buffer registers

●• Two internal 12-bit Digital-to-Analog Converters (DACs)

●— 2 μs settling time when output swing from rail to rail

●— Automatic waveform generation generates square, triangle and sawtooth waveforms with programmable period, update rate, and range

●• One 16-bit multi-purpose Quad Timer module (TMR)

●— Up to 96MHz operating clock

●— Eight independent 16-bit counter/timers with cascading capability

●— Each timer has capture and compare capability

●— Up to 12 operating modes

●• One Queued Serial Communication Interface (QSCI) with LIN Slave functionality

●— Full-duplex or single-wire operation

●— Two receiver wake-up methods:

●– Idle line

●– Address mark

●— Four-bytes-deep FIFOs are available on both transmitter and receiver

●• One Queued Serial Peripheral Interfaces (QSPI)

●— Full-duplex operation

●— Master and slave modes

●— Four-words-deep FIFOs available on both transmitter and receiver

●— Programmable Length Transactions (2 to 16 bits)

●• One Inter-Integrated Circuit (I2C) port

●— Operates up to 400kbps

●— Supports both master and slave operation

●— Supports both 10-bit address mode and broadcasting mode

●• One 16-bit Programmable Interval Timer (PIT)

●• Two analog Comparators (CMPs)

●— Selectable input source includes external pins, DACs

●— Programmable output polarity

●— Output can drive Timer input, PWM fault input, PWM source, external pin output and trigger ADCs

●— Output falling and rising edge detection able to generate interrupts

●• Computer Operating Properly (COP)/Watchdog timer capable of selecting different clock sources

●• Up to 26 General-Purpose I/O (GPIO) pins with 5V tolerance

●• Integrated Power-On Reset and Low-Voltage Interrupt Module

●• Phase Lock Loop (PLL) provides a high-speed clock to the core and peripherals

●• Clock sources:

●— On-chip relaxation oscillator

●— External clock: Crystal oscillator, ceramic resonator, and external clock source

●• JTAG/EOnCE debug programming interface for real-time debugging