The MC9S08AC16CFJE is a 8-bit Flexis Microcontroller based on enhanced HCS08 CPU (20MHz bus) with CISC architecture operates at a maximum frequency of 40MHz. The device incorporates 16kB internal flash, 1kB internal RAM, 8-channel 10-bit A/D converter and 22 general-purpose I/O pins. This device also features peripherals like one inter-integrated circuit (IIC) bus module to operate at up to 100kbps and one serial peripheral interface modules (SPI). Breakpoint capability to allow single breakpoint setting during in-circuit debugging (plus two more breakpoints in on-chip debug module). Debug module containing two comparators and nine trigger modes. Eight deep FIFO for storing change-of-flow addresses and event-only data. Debug module supports both tag and force breakpoints.
● HC08 Instruction set with added BGND instruction
● Background debugging system
● Support for up to 32 Interrupt/reset sources
● Clock source options include crystal, resonator, external clock or internally generated clock
● Optional computer operating properly (COP) reset
● Low-voltage detection with reset or interrupt
● Illegal opcode detection with reset
● Illegal address detection with reset
● Wait plus two stops
● Three 16-bit Timer/pulse-width modulator (TPM) modules
● 7-pin Keyboard interrupt module (KBI)
● Software selectable pull-ups on ports when used as inputs
● Software selectable slew rate control on ports when used as outputs
● Software selectable drive strength on ports when used as outputs
● Master reset pin and power-on reset (POR)
● Internal pull-up on RESET, IRQ and BKGD/MS pins
