The MC9S08AW60CPUE is a 8-bit General-purpose Microcontroller based on enhanced HCS08 CPU (20MHz bus) with CISC architecture operates at a maximum frequency of 40MHz. The device incorporates 60kB internal flash, 2kB internal RAM, 16-channel 10-bit A/D converter and 54 general-purpose I/O pins. This device also features peripherals like one inter-integrated circuit (IIC) bus module to operate at up to 100kbps, one serial peripheral interface modules (SPI), two serial communications interface (SCI) modules and real-time counter (RTC). Breakpoint capability to allow single breakpoint setting during in-circuit debugging (plus two more breakpoints in on-chip debug module). On-chip real-time in-circuit emulation (ICE) with two comparators (plus one in BDM), nine trigger modes and on-chip bus capture buffer.
● HC08 Instruction set with added BGND instruction
● Single-wire background debug mode interface
● On-chip real-time in-circuit emulation (ICE)
● Support for up to 32 Interrupt/reset sources
● Clock source options include crystal, resonator, external clock or internally generated clock
● Optional computer operating properly (COP) reset
● Low-voltage detection with reset or interrupt
● Illegal opcode detection with reset
● Illegal address detection with reset
● Wait plus two stops
● One 2-channel and one 6-channel 16-bit Timer/pulse-width modulator (TPM) module
● 8-pin Keyboard interrupt module (KBI)
● Software-selectable pull-ups on ports when used as inputs
● Software-selectable slew rate control on ports when used as outputs
● Software-selectable drive strength on ports when used as outputs
● Master reset pin and power-on reset (POR)
● Internal pull-up on RESET, IRQ and BKGD/MS pins
