| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 8 Pin |
| Supply Voltage (DC) | 4.50V (min) |
| Operating Voltage | 4.5V ~ 18V |
| Case/Package | SOIC-8 |
| Rise/Fall Time | 25 ns |
| Number of Outputs | 2 Output |
| Output Current | 3 A |
| Number of Channels | 2 Channel |
| Number of Positions | 8 Position |
| Power Dissipation | 699 mW |
| Rise Time | 40ns (Max) |
| Fall Time | 40ns (Max) |
| Fall Time (Max) | 30 ns |
| Fall Time (Max) | 30 ns |
| Operating Temperature (Max) | 125 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Power Dissipation (Max) | 669 mW |
| Supply Voltage | 4.5V ~ 18V |
| Supply Voltage (Max) | 18 V |
| Supply Voltage (Min) | 4.5 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 4.9 mm |
| Size-Width | 3.9 mm |
| Size-Height | 1.25 mm |
| Operating Temperature | -40℃ ~ 125℃ |
The MCP14E10-E/SN is a high-speed power MOSFET Driver with an enable function. It is capable of providing 3A of peak current. The dual inverting and complementary outputs are directly controlled from either TTL or CMOS. This device also features low shoot-through current, near matched rise/fall times and propagation delays, which make them ideal for high switching frequency applications. This device operates from a 4.5 to 18V single power supply and can easily charge and discharge 1800pF of MOSFET gate capacitance. It provides low enough impedance, in both the ON and OFF states, to ensure the MOSFETs intended state will not be affected even by large transients. The additional control of the driver output is allowed by the use of separate enable functions. The ENB_A and ENB_B pins are active-high and are internally pulled up to VDD. The pins may be left floating for standard operation. This device is highly latch-up resistant under any conditions within their power and voltage ratings.
● Independent enable function for each driver output
● Low shoot-through/cross-conduction current in output stage
● High capacitive load drive capability
● Short delay times
● Low supply current
● Logic input will withstand negative swing up to 5V
Microchip
1 Pages / 0.17 MByte
Microchip
2 Pages / 0.1 MByte
Microchip
Microchip MCP14E10-E/SN, Dual MOSFET Power Driver, 3A, 4.5 → 18V, Non-Inverting, 8Pin SOIC
Microchip
Microchip MCP14E10-E/P, Dual MOSFET Power Driver, 3A, 4.5 18V, Non-Inverting, 8Pin PDIP
Microchip
MCP14E10 Series 4.5 - 18V 3A Dual Non- Inverting Power MOSFET Driver - DFN8
Microchip
MCP14E10-E/MF, Dual MOSFET Power Driver, 3A, 4.5 to 18V, Non-Inverting, 8Pin DFN-S
Microchip
MOSFET DRVR 3A 2Out Lo Side Non-Inv 8Pin SOIC N T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
