TYPE | DESCRIPTION |
---|
Number of Outputs | 1 Output |
Input Voltage (DC) | 2.00V ~ 4.50V |
Output Voltage | 3.6 V |
Output Current | 700 mA |
Output Power | 3 W |
Input Voltage (Max) | 4.5 V |
Input Voltage (Min) | 2 V |
Input Voltage | 2V ~ 4.5V |
The MCP1650DM-LED1 is a MCP1650 3W white LED demo board fully assembled, tested and ready for evaluation and demonstration. The board also supports for MCP1650/1/2/3 family of 750KHz gated oscillator controller in an 8 pin or 10 pin MSOP package. The family includes peak current limit, adjustable output voltage/current, low battery detection and power good indication. This board is capable of functioning without any extra lab supplies or loads. A three socket AA battery holder is attached to the board. However, there are terminals provided to allow the use of an external voltage supply. The input is fused for overcurrent protection. the MCP165X 3W white LED demo board requires 2.0V to 4.5V for proper operation. Connect the positive terminal of the external supply to TP1 and the ground terminal of the external supply to TP2.
Microchip
28 Pages / 0.58 MByte
Microchip
20 Pages / 0.23 MByte
Microchip
MCP1650/51/52/53 is a 750kHz gated oscillator boost controller packaged in an 8 or 10Pin MSOP package. Developed for high-power, ...
Microchip
MCP1650S-E/MS, Boost Converter, Step Up 100mA 3.3 to 100V, 850kHz, 8Pin MSOP
Microchip
MCP1650 DC to DC Controller 5VDC/12VDC Output Evaluation Board Automotive
Microchip
MCP1650R-E/MS, Boost Converter, Step Up 100mA 3.3 to 100V, 850kHz, 8Pin MSOP
Microchip
MCP1650 DC to DC Controller 5VDC Output Demonstration Board Automotive
Microchip
Power Management IC Development Tools MCP1650 Mult White LED Demo Brd
Microchip
DC-DC Cntrlr Single-OUT Step Up 850kHz Automotive 8Pin MSOP T/R
Microchip
MCP1650, WHITE LED, 3W, DEMO BOARD
Microchip
DC-DC Cntrlr Single-OUT Step Up 850kHz Automotive 8Pin MSOP T/R
Microchip
PMIC FOR SAMA5DX/SAM9X6 MPUS
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.