| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 8 Pin |
| Supply Voltage (DC) | 1.80V (min) |
| Capacitance Tolerance | ±20 % |
| Case/Package | MSOP-8 |
| Supply Current | 0.045 mA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 1 Channel |
| Number of Positions | 64 Position |
| Resistance | 50 kΩ |
| Resistance Tolerance | ±20 % |
| Operating Temperature (Max) | 125 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Supply Voltage | 1.8V ~ 5.5V |
| Supply Voltage (Max) | 5.5 V |
| Supply Voltage (Min) | 1.8 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 3 mm |
| Size-Width | 3 mm |
| Size-Height | 0.95 mm |
| Operating Temperature | -40℃ ~ 125℃ |
| Temperature Coefficient | ±10 ppm/℃ |
The MCP4011-503E/MS is a 6-bit Digital Potentiometer can be configured as either a potentiometer or rheostat. The wiper setting is controlled through a simple up/down (U/D) serial interface. It is intended to be used in applications where a programmable resistance with moderate bandwidth is desired. The digital potentiometer is available in four nominal resistances (RAB), where the nominal resistance is defined as the resistance between terminal A and terminal B. There are 63 resistors in a string between terminal A and terminal B. The wiper can be set to tap onto any of these 63 resistors thus providing 64 possible settings (including terminal A and terminal B). The VDD pin is the device"s positive power supply input. The input power supply is relative to VSS and can range from 1.8 to 5.5V. A decoupling capacitor on VDD (to VSS) is recommended to achieve maximum performance.
● Simple up/down (U/D) protocol
● power-ON recall of default wiper setting
● 10ppm Typical ratiometric (potentiometer)
● 75R Typical low wiper resistance
● Up to 12.5V high-voltage tolerant digital inputs
● 1µA Maximum static current low-power operation
Microchip
60 Pages / 3.27 MByte
Microchip
46 Pages / 0.7 MByte
Microchip
35 Pages / 0.39 MByte
Microchip
3 Pages / 0.52 MByte
Microchip
24 Pages / 10.96 MByte
Microchip
Integrated circuit: digital potentiometer; 50kΩ; 6Bit; SO8; SMD
Microchip
MCP4011-503E/MS, Digital Potentiometer 50K 64Position Linear Serial-2 Wire 8Pin MSOP
Microchip
IC,DIGITAL POTENTIOMETER,CMOS,LLCC,8Pin,PLASTIC
Microchip
IC,DIGITAL POTENTIOMETER,CMOS,TSOP,5Pin,PLASTIC
Microchip
IC,DIGITAL POTENTIOMETER,CMOS,TSOP,6Pin,PLASTIC
Microchip
Low-Cost 64-Step Volatile Digital POT
Microchip
Low-Cost 64-Step Volatile Digital POT
Microchip
Low-Cost 64-Step Volatile Digital POT
Microchip
Low-Cost 64-Step Volatile Digital POT
Microchip
Low-Cost 64-Step Volatile Digital POT
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
