| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 8 Pin |
| Supply Voltage (DC) | 2.70V (min) |
| Capacitance Tolerance | ±30 % |
| Case/Package | SOIC-8 |
| Supply Current | 500 µA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 1 Channel |
| Number of Positions | 256 Position |
| Clock Speed | 10.0MHz (max) |
| Resistance | 50 kΩ |
| Resistance Tolerance | ±20 % |
| Quiescent Current | 10.0 nA |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Supply Voltage | 2.7V ~ 5.5V |
| Supply Voltage (Max) | 5.5 V |
| Supply Voltage (Min) | 2.7 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 4.9 mm |
| Size-Width | 3.9 mm |
| Size-Height | 1.25 mm |
| Operating Temperature | -40℃ ~ 85℃ |
| Temperature Coefficient | ±800 ppm/℃ |
The MCP41050-I/SN is a Digital Potentiometer with SPI™ interface. The wiper position of the potentiometer varies linearly and is controlled via an industry-standard SPI interface. It consumes <1µA during static operation. A software shutdown feature is provided that disconnects the A terminal from the resistor stack and simultaneously connects the wiper to the B terminal. The wiper is reset to the mid-scale position (80h) upon power-up. The RS (reset) pin implements a hardware reset and also returns the wiper to mid-scale. Its SPI interface includes both the SI and SO pins, allowing daisy-chaining of multiple devices. Channel-to-channel resistance matching on the potentiometer varies by less than 1%.
● Low power CMOS technology
● Shutdown feature open circuits of all resistors for maximum power savings
● ±1 LSB Maximum INL and DNL
● 1µA Maximum supply current in static operation
Microchip
32 Pages / 0.84 MByte
Microchip
36 Pages / 0.51 MByte
Microchip
14 Pages / 0.55 MByte
Microchip
40 Pages / 0.07 MByte
Microchip
24 Pages / 10.96 MByte
Microchip
1 Pages / 0.12 MByte
Microchip
The MCP41050 single-channel digital potentiometer features 8Bit resolution (256 wiper steps), and an industry-standard SPI serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41050 ha.
Microchip
Digital Potentiometer 50KΩ 256POS Volatile Linear 8Pin SOIC N Tube
Microchip
Digital Potentiometer 50KΩ 256POS Volatile Linear 8Pin SOIC N T/R
Microchip
50K DIGITAL POTENTIOMETER, 3-WIRE SERIAL CONTROL INTERFACE, 256Positions, PDIP8, 0.3INCH, PLASTIC, DIP-8
Microchip
50K DIGITAL POTENTIOMETER, 3-WIRE SERIAL CONTROL INTERFACE, 256Positions, PDSO8, 0.15INCH, PLASTIC, SOIC-8
Microchip
Digital Potentiometer 50KΩ 256POS Volatile Linear 8Pin PDIP Tube
Microchip
Digital Potentiometer 50KΩ 256POS Volatile Linear 8Pin SOIC N T/R
MIC
IC POT DIGITAL 50K 1CH SPI 8SOIC
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
