The MSP430FR6989IPZ is a 16-bit ultra-low-power Mixed-signal Microcontroller features an embedded FRAM non-volatile memory, powerful 16-bit RISC MSP430 CPU and different peripherals. The architecture showcases seven low-power modes, which are optimized to achieve extended battery life. FRAM is a new non-volatile memory that combines the speed, flexibility and endurance of SRAM with the stability and reliability of flash, all at lower total power consumption. The device configurations with five 16-bit timers, 12-bit A/D converter, liquid crystal display driver, a 16-channel comparator with voltage reference generation, a hardware multiplier and 83 general-purpose I/O pins. This device operates at a maximum frequency of 16MHz.
● Ultra-low-power ferroelectric RAM (FRAM)
● 32-bit Hardware multiplier (MPY)
● 3-channel internal DMA
● Real-time clock (RTC) with calendar and alarm functions
● Five 16-bit timers with up to 3 Capture/Compare registers
● 16-bit and 32-bit Cyclic redundancy checker (CRC16, CRC32)
● Extended scan interface (ESI) for background water, heat and gas volume measurement
● 12-bit ADC with internal reference and sample-and-hold and up to 16 external input channels
● Integrated LCD driver with contrast control for up to 320 segments
● Multifunction Input/output ports
● 256-bit AES Security encryption and decryption coprocessor
● True random number seed for random number generation algorithm
● UART with automatic baud-rate detection
● IrDA Encoder and decoder
● SPI at rates up to 10Mbps
● I2C with multiple-slave addressing
● Hardware UART and I2C bootstrap loader (BSL)
● Fixed-frequency DCO with six selectable factory-trimmed frequencies
● Low-power low-frequency internal clock source (VLO)
● 32kHz Crystals (LFXT)
●These products use FRAM non-volatile memory technology. FRAM retention is sensitive to extreme temperatures, such as those experienced during reflow or hand soldering.
