NCN5150DR2G Datasheet PDF - ON Semiconductor

The NCN5150 is a single-chip integrated slave transceiver for use in two-wire Meter Bus (M-BUS) slave devices and repeaters. The transceiver provides all of the functions needed to satisfy the European Standards EN 13757-2 and EN 1434-3 describing the physical layer requirements for M-BUS. It includes a programmable power level of up to 2 (SOIC version) or 6 (NQFP version) unit loads which are available for use in external circuits through a 3.3V LDO regulator. The NCN5150 can provide communication up to the maximum M-BUS communication speed of 38400 baud (half-duplex).

●Features

●---

● |

● Single-chip M-Bus transceiver

● UART communication speeds up to 38400 baud

● Integrated 3.3 V VDD LDO regulator with extended peak current capability of 15 mA

● Supports powering slave device from the bus or from external power supply

● Adjustable I/O levels

● Adjustable constant current sink up to 2 or 6 unit loads depending on the package

● Low bus voltage operation

● Extended current budget for external circuits: at least 0.88 mA

● Polarity independent

● Power-fail function

● Fast startup - no external transistor required on STC pin

● Industrial ambient temperature range of -40C to +85C

● Available in:

●\- 16-pin SOIC (pin-to-pin compatible with TSS721A)

●\- 20-pin QFN

● These are Pb-free devices