NCP803SN463T1 Datasheet PDF - ON Semiconductor

The MAX803/NCP803 is a cost-effective system supervisor circuit designed to monitor V in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output is driven active within 10 µsec of V falling through the reset voltage threshold. Reset is maintained active for a timeout period which trimmed by factor after V rises above the reset threshold. The MAX803/NCP803 has an open drain active-low RESET(bar) output. The output of the MAX803/NCP803 is guaranteed valid down to V = 1.0 V and is available in a SOT-23 and SC-70 package.The MAX803/NCP803 is optimized to reject fast transient glitches on the V line. Low supply current of 0.5 µA (V = 3.3 V) make this device suitable for battery powered applications.

●Features

●---

● |

● Precision VCC Monitor for 1.5 V, 1.8V, 2.5 V, 3.0 V, 3.3 V and 5.0 V supplies

● Precision Monitoring Voltages from 1.2 V to 4.9 V Available in 100 mV Steps

● Four Guaranteed Minimum RESET Output Duration

●(1ms, 20ms, 100ms and 140ms)

● RESET Output Guaranteed to VCC = 1.0 V

● Low 0.5 uA Supply Current

● VCC Transient Immunity

● Small SOT-23 and SC-70 Package

● No External Components

● Wide Operating Temperature: -40°C to 105°C