The NCV7710 is a powerful Driver-IC for automotive body control systems. The IC is designed to control lock motor in the door of a vehicle. With the monolithic full-bridge driver stage, the IC is able to control lock motor. The NCV7710 is controlled thru a 24 bit SPI interface with in-frame response.
●Features
●---
● |
● Operating Range from 5.5 V to 28 V
● Two High-Side and Two Low-Side Drivers Connected as Halfbridges
●\- 2 Half−bridges Iload = 6 A; Rdson = 150 mΩ @ 25°C
● Programmable Soft-start Function to Drive Loads with Higher Inrush Currents as Current Limitation Value
● Support of PWM Control Frequency Outside the Audible Noise
● Support of Active Freewheeling to Reduce Power Dissipation
● Multiplex Current Sense Analog Output for Advanced Load Monitoring
● Very Low Current Consumption in Standby Mode
● Charge Pump Output to Control an External Reverse Polarity Protection MOSFET
● 24-Bit SPI Interface for Output Control and Diagnostic
● Protection Against Short Circuit, Overvoltage and Overtemperature
● Downwards Pin-to-pin and SPI Registers Compatible with NCV7707
