NL37WZ14USG Datasheet PDF - ON Semiconductor

The NL37WZ14USG is a high performance Triple Inverter with Schmitt-trigger inputs operating from a 1.65 to 5.5V supply. Pin configuration and function are the same as the NL37WZ04, but the inputs have hysteresis and with its Schmitt trigger function, the NL37WZ14 can be used as a line receiver which will receive slow input signals. The NL37WZ14 is capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. In addition, it has a greater noise margin than conventional inverters. The NL37WZ14 has hysteresis between the positive-going and the negative-going input thresholds (typically 1.0V) which is determined internally by transistor ratios and is essentially insensitive to temperature and supply voltage variations.

● Overvoltage tolerant inputs and outputs

● LVTTL Compatible - Interface capability with 5V TTL Logic with VCC=3V

● LVCMOS compatible

● 24mA Balanced output sink and source capability

● Near zero static supply current substantially reduces system power requirements

● Current drive capability is 24mA at the outputs

● Chip complexity - FET=94

● +150°C Junction temperature under bias

● 250mW Power dissipation in still air at 85°C

●ESD sensitive device, take proper precaution while handling the device.