The NPH10S2405EIC is an isolated single-output DC/DC Converter combines ease of application with versatility. The pin pattern is based on the popular industry standard, but two additional pins may optionally be fitted to provide a variety of features not commonly found on units of this type. High efficiency enables full rating to be achieved in a small package without heat-sinking. It is thermally protected against sustained overload. The copper case achieves efficient heat transfer and screening. It has been recognized by Underwriters Laboratory (UL) to UL 1950 for operational insulation.
● Industry standard pin-out
● Non latching current limit
● Operation to zero load
● Protected against load faults
● Internal over temperature protection
● Uses no electrolytic capacitors
● Fixed frequency
● No external components required
● Up to 1.5Wcm³ power density
● 12W Surge rating
● 1.5kV Input to output isolation
● Continuous rating to 10W at 72°C without heat-sink
● 83% Efficiency
● 470µF Maximum load capacitance
