Overview
●The device is an SD 3.0-compliant bidirectional dual voltage level translator with auto-direction control. It is designed to interface between a memory card operating at 1.8 V or 3.0 V signal levels and a host with a nominal supply voltage of 1.2 V to 1.8 V. The device supports SD 3.0 SDR104, SDR50, DDR50, SDR25, SDR12 and SD 2.0 High-Speed (50 MHz) and Default-Speed (25 MHz) modes. The device has an integrated voltage selectable low dropout regulator to supply the card-side I/Os, an auto-enable/ disable function connected to the VSD supply pin, built-in EMI filters and robust ESD protections (IEC 61000-4-2, level 4).
●MoreLess
●## Features
● Supports up to 208 MHz clock rate
● SD 3.0 specification-compliant voltage translation to support SDR104, SDR50, DDR50, SDR25, SDR12, High-Speed and Default-Speed modes
● 1.2 V to 1.8 V host side interface voltage support
● Feedback channel for clock synchronization
● 100 mA Low dropout voltage regulator to supply the card-side I/Os
● Low power consumption by push-pull output stage with break-before-make architecture
● Automatic enable and disable through VSD
● Integrated pull-up and pull-down resistors: no external resistors required
● Integrated EMI filters suppress higher harmonics of digital I/Os
● Integrated 8 kV ESD protection according to IEC 61000-4-2, level 4 on card side
● Level shifting buffers keep ESD stress away from the host (zero-clamping concept)
● 20-ball WLCSP; pitch 0.4 mm
●## Target Applications
● Smart phones
● Mobile handsets
● Digital cameras
● Tablet PCs
● Laptop computers
● SD, MMC or microSD card readers
●## Features
● SD, MMC or microSD card readers
