Product Details
●The OP270 is a high performance, monolithic, dual operational amplifier with exceptionally low voltage noise density (5 nV/√Hz maximum at 1 kHz). It offers comparable performance to the industry-standard OP27 from Analog Devices, Inc.
●The OP270 features an input offset voltage of less than 75 μV and an offset drift of less than 1 μV/°C, guaranteed over the full military temperature range. Open-loop gain of the OP270 is more than 1,500,000 into a 10 kΩ load, ensuring excellent gain accuracy and linearity, even in high gain applications. The input bias current is less than 20 nA, which reduces errors due to signal source resistance. With a common-mode rejection (CMR) of greater than 106 dB and a power supply rejection ratio (PSRR) of less than 3.2 μV/V, the OP270 significantly reduces errors due to ground noise and power supply fluctuations. The power consumption of the dual OP270 is one-third less than two OP27 devices, a significant advantage for power conscious applications. The OP270 is unity-gain stable with a gain bandwidth product of 5 MHz and a slew rate of 2.4 V/μs.
●The OP270 offers excellent amplifier matching, which is important for applications such as multiple gain blocks, low noise instrumentation amplifiers, dual buffers, and low noise active filters.
●The OP270 conforms to the industry-standard 8-lead CERDIP and PDIP pinouts.
●For higher speed applications, the ADA4004-2 or the AD8676 are recommended. For a quad op amp, see the OP470 data sheet.
●### Features and Benefits
● Very low noise density of
●5 nV/√Hz at 1 kHz maximum
● Excellent input offset voltage of 75 μV maximum
● Low offset voltage drift of
●1 μV/°C maximum
● Very high gain of 1500 V/mV minimum
● Outstanding CMR of 106 dB minimum
● Slew rate of 2.4 V/μs typical
● Gain bandwidth product of
●5 MHz typical
● Industry-standard 8-lead dual pinout