| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Number of Pins | 8 Pin |
| Supply Voltage (DC) | 5.00 V |
| Case/Package | DIP-8 |
| Output Current | 18mA @5V |
| Supply Current | 175 µA |
| Number of Circuits | 2 Circuit |
| Number of Channels | 2 Channel |
| Number of Positions | 8 Position |
| Common Mode Rejection Ratio | 90 dB |
| Bandwidth | 85 kHz |
| Slew Rate | 30.0 mV/μs |
| Gain Bandwidth Product | 0.075 MHz |
| Input Impedance | 10.0 MΩ |
| Input Offset Voltage | 300 µV |
| Input Bias Current | 7 nA |
| Operating Temperature (Max) | 125 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Gain Bandwidth | 0.075 MHz |
| Minimum CMRR Range | 90 dB |
| Supply Voltage | 3V ~ 36V |
| Supply Voltage (Max) | 36 V |
| Supply Voltage (Min) | 3 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 9.27 mm |
| Size-Width | 7.24 mm |
| Size-Height | 3.43 mm |
| Operating Temperature | -40℃ ~ 125℃ |
The OP295GPZ is a dual rail-to-rail Operational Amplifier for use with servo amplifiers and actuator drives. By using a bipolar front end, lower noise and higher accuracy than those of CMOS designs have been achieved. Both input and output ranges include the negative supply, providing the user with zero-in/zero-out capability. For users of 3.3V systems such as lithium batteries, the OP295 is specified for 3V operation. Maximum offset voltage is specified at 300µV for 5V operation and the open-loop gain is a minimum of 1000V/mV. This yields performance that can be used to implement high accuracy systems, even in single-supply designs. The ability to swing rail-to-rail and supply 15mA to the load makes the OP295 ideal drivers for power transistors and H bridges. This allows designs to achieve higher efficiencies and to transfer more power to the load than previously possible without the use of discrete components.
● Rail-to-rail output swing
● Unity-gain stable
● 3 to 36V Single-supply operation
● 300µV Low offset voltage
● 75kHz Gain bandwidth
● 1000V/mV High open-loop gain
● 150µA Maximum low supply current/per amplifier
●ESD sensitive device, take proper precaution while handling the device.
ADI
22µA, RRIO, CMOS, 18V Operational Amplifier
TT Electronics/Optek Technology
Plastic Infrared Emitting Diode
ADI
ANALOG DEVICES OP295GSZ Operational Amplifier, Dual, 2 Amplifier, 1kHz, 0.03V/µs, ± 1.5V to ± 15V, SOIC, 8Pins
ADI
ANALOG DEVICES OP295GPZ Operational Amplifier, Dual, 2 Amplifier, 85kHz, 0.03V/µs, 3V to 36V, DIP, 8Pins
ADI
OP Amp Dual GP R-R O/P 18V/36V 8Pin SOIC N T/R
ADI
ANALOG DEVICES OP295GS Operational Amplifier, Dual, 2 Amplifier, 85kHz, 0.03V/µs, ± 1.5V to ± 15V, NSOIC, 8Pins
ADI
OP Amp Dual GP R-R O/P ±18V/36V 8Pin SOIC N T/R
ADI
OP Amp Dual GP R-R O/P ±18V/36V 8Pin PDIP
ADI
OP Amp Dual GP R-R O/P 18V/36V 8Pin SOIC N T/R
TT Electronics/Optek Technology
OP295A Series 890nm 20° 100mA Through Hole Plastic Infrared Emitting Diode
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
