| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Number of Pins | 8 Pin |
| Case/Package | TO-99-8 |
| Supply Current | 900 µA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 1 Channel |
| Power Dissipation | 0.5 W |
| Common Mode Rejection Ratio | 90 dB |
| Input Offset Drift | 5.00 µV/K |
| Slew Rate | 3.00 V/μs |
| Gain Bandwidth Product | 1 MHz |
| Input Offset Voltage | 140 µV |
| Input Bias Current | 0.075 pA |
| Operating Temperature (Max) | 70 ℃ |
| Operating Temperature (Min) | 0 ℃ |
| Gain Bandwidth | 1 MHz |
| Power Dissipation (Max) | 500 mW |
| Minimum CMRR Range | 90 dB |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Width | 9.08 mm |
| Operating Temperature | 0℃ ~ 70℃ |
Easily produce a large amount of gain in your electronic circuit by using this general purpose amplifier OPA128KM from Texas Instruments in a cascaded fashion. Its maximum power dissipation is 500 mW. Its typical dual supply voltage is ±9|±12|±15 V, with a minimum of ±5 V and maximum of ±18 V. This op amp has a minimum operating temperature of 0 °C and a maximum of 70 °C. It has a single channel per chip. This device is made with bifet technology. This device uses dual power supplies.
TI
Difet Electrometer-Grade Operational Amplifier
Burr Brown
Difet Electrometer-Grade OPERATIONAL AMPLIFIER
TI
TEXAS INSTRUMENTS OPA128SM Operational Amplifier, Single, 1 Amplifier, 1MHz, 3V/µs, ± 5V to ± 18V, TO-99, 8Pins
TI
TEXAS INSTRUMENTS OPA128LM Operational Amplifier, Single, 1 Amplifier, 1MHz, 3V/µs, ± 5V to ± 18V, TO-99, 8Pins
TI
TEXAS INSTRUMENTS OPA128JM Operational Amplifier, Single, 1 Amplifier, 1MHz, 3V/µs, ± 5V to ± 18V, TO-99, 8Pins
Burr Brown
Difet Electrometer-Grade OPERATIONAL AMPLIFIER
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
