| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 5 Pin |
| Case/Package | SOT-23-5 |
| Supply Current | 220 µA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 1 Channel |
| Common Mode Rejection Ratio | 70 dB |
| Input Offset Drift | 15.0 µV/K |
| Bandwidth | 1.00 MHz |
| Slew Rate | 3.50 V/μs |
| Gain Bandwidth Product | 1 MHz |
| Input Offset Voltage | 2.5 mV |
| Input Bias Current | 5 pA |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Gain Bandwidth | 1 MHz |
| Minimum CMRR Range | 70 dB |
| Supply Voltage (Max) | 36 V |
| Supply Voltage (Min) | 4.5 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Size-Width | 1.6 mm |
| Operating Temperature | -40℃ ~ 85℃ |
If you need your circuit to amplify a voltage signal then this general purpose amplifier OPA137NA/3K OP amp from Texas Instruments is perfect for you! Its typical dual supply voltage is ±15 V, with a minimum of ±2.25 V and maximum of ±18 V. This op amp has a minimum operating temperature of -40 °C and a maximum of 85 °C. It has a single channel per chip. This device uses one or two power supplies.
TI
Op Amp Single GP ±18V/36V 5Pin SOT-23 T/R
Burr Brown
LOW COST FET-INPUT OPERATIONAL AMPLIFIERS MicroAmplifier Series
TI
Low Cost FET-Input Operational Amplifiers 5-SOT-23
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
