OPA2365AIDG4 Datasheet PDF - TI

The OPA2365AIDG4 is a zero-crossover rail-to-rail high-performance CMOS Operational Amplifier, optimized for very low voltage and single-supply applications. Rail-to-rail input/output, low-noise (4.5nV/Hz) and high-speed operations (50MHz gain bandwidth) make them ideal for driving sampling analogue-to-digital converters (ADCs). The operation amplifier is well-suited for cell phone power amplifier control loops. Special features include excellent common-mode rejection ratio (CMRR), no input stage crossover distortion, high input impedance and rail-to-rail input and output swing. The input common-mode range includes both the negative and positive supplies. The output voltage swing is within 10mV of the rails.

● 50MHz Gain bandwidth

● Zero-crossover distortion topology

● 0.0004% Excellent THD + N

● 100dB Minimum CMRR

● Rail-to-rail input and output

● Input 100mV beyond supply rail

● 4.5nV/Hz at 100kHz Low noise

● 0.3µs to 0.01% Fast settling

● 100µV Low offset

● 0.2pA Low input bias current

● 2.2 to 5.5V Operation

● Green product and no Sb/Br

●IC can be damaged by ESD. We recommend that all ICs be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.