| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 8 Pin |
| Case/Package | VSSOP-8 |
| Output Current | 75mA @5V |
| Supply Current | 8.5 mA |
| Number of Circuits | 2 Circuit |
| Number of Channels | 2 Channel |
| Number of Positions | 8 Position |
| Common Mode Rejection Ratio | 76dB ~ 80dB |
| Input Offset Drift | 27.0 µV/K |
| Bandwidth | 100 MHz |
| Slew Rate | 560 V/μs |
| Gain Bandwidth Product | 100 MHz |
| Input Offset Voltage | 1.5 mV |
| Input Bias Current | 5 µA |
| Available Channels | S, D |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| 3dB Bandwidth | 290 MHz |
| Gain Bandwidth | 100 MHz |
| Minimum CMRR Range | 76 dB |
| Supply Voltage | 2.8V ~ 11V |
| Supply Voltage (Max) | 11 V |
| Supply Voltage (Min) | 3 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Size-Length | 3 mm |
| Size-Width | 3 mm |
| Size-Height | 0.97 mm |
| Operating Temperature | -40℃ ~ 85℃ |
The OPA2830 is a dual, low-power, single-supply, wideband, voltage-feedback amplifier designed to operate on a single +3V or +5V supply. Operation on ±5V or +10V supplies is also supported. The input range extends below ground and to within 1.8V of the positive supply. Using complementary common-emitter outputs provides an output swing to within 25mV of ground and +VS while driving 150. High output drive current (75mA) and low differential gain and phase errors also make it ideal for single-supply consumer video products.
●Low distortion operation is ensured by the high gain bandwidth product (100MHz) and slew rate (500V/µs), making the OPA2830 an ideal input buffer stage to 3V and 5V CMOS Analog-to-Digital Converters (ADCs). Unlike earlier low-power, single-supply amplifiers, distortion performance improves as the signal swing is decreased. A low 9.2nV/Hz input voltage noise supports wide dynamic range operation.
●The OPA2830 is available in an industry-standard SO-8 package. The OPA2830 is also available in a small MSOP-8 package. For fixed-gain and line driver applications, consider the OPA2832.
Burr Brown
Low-Power, Single-Supply, Wideband Operational Amplifier
TI
Dual, Low-Power, Single-Supply Wideband Operational Amplifier
TI
Op Amp Dual Volt Fdbk R-R O/P ±5.5V/11V 8Pin SOIC T/R
TI
TEXAS INSTRUMENTS OPA2830ID. Operational Amplifier, Dual, 2 Amplifier, 230MHz, 500V/µs, ± 1.5V to ± 5.5V, SOIC, 8Pins
TI
TEXAS INSTRUMENTS OPA2830IDGKT Operational Amplifier, 2 Amplifier, 100MHz, 560V/µs, VSSOP, 8Pins
TI
TEXAS INSTRUMENTS OPA2830IDGKR Operational Amplifier, Dual, 2 Amplifier, 100MHz, 500V/µs, ± 1.5V to ± 5.5V, MSOP, 8Pins
TI
OP Amp Dual Volt Fdbk R-R O/P ±5.5V/11V 8Pin SOIC T/R
TI
OP Amp Dual Volt Fdbk R-R O/P ±5.5V/11V 8Pin SOIC Tube
TI
Op Amp Dual Volt Fdbk R-R O/P ±5.5V/11V 8Pin VSSOP T/R
TI
Op Amp Dual Volt Fdbk R-R O/P ±5.5V/11V 8Pin VSSOP T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
