The OPAx320-Q1 (OPA320-Q1, OPA2320-Q1) device is a new generation of precision low-voltage CMOS operational amplifiers (op amps) optimized for very low noise and wide bandwidth and operate on a low quiescent current of only 1.45 mA.
●The OPAx320-Q1 device is ideal for low-power, single-supply applications. Low-noise (7 nV/vHz) and high-speed operation also makes the device well-suited for driving sampling analog-to-digital converters (ADCs). Other applications include signal conditioning and sensor amplification.
●The OPAx320-Q1 device features a linear input stage with zero-crossover distortion that delivers excellent common-mode rejection ratio (CMRR) of 114 dB (typical) over the full input range. The input common-mode range extends 100 mV beyond the negative and positive supply rails. The output voltage typically swings within 10 mV of the rails.
●In addition, the OPAx320-Q1 device has a wide supply voltage range from 1.8 to 5.5 V with excellent PSRR (106 dB) over the entire supply range, making the device suitable for precision, low-power applications that run directly from batteries without regulation.
●The OPAx320-Q1 device is available in an 8-pin VSSOP (DGK) package.
● Qualified for Automotive Applications
● AEC-Q100 Qualified with the Following Results:
● Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
● Device HBM ESD Classification Level 2
● Device CDM ESD Classification Level C4B
● Precision with Zero-Crossover Distortion:
● Low Offset Voltage: 150 µV (max)
● High CMRR: 114 dB
● Rail-to-Rail I/O
● Low Input Bias Current: 0.9 pA (max)
● Low Noise: 7 nV/vHz at 10kHz
● Wide Bandwidth: 20 MHz
● Slew Rate: 10 V/µs
● Quiescent Current: 1.45 mA/ch
● Single-Supply Voltage Range: 1.8 to 5.5 V
● Unity-Gain Stable
● Small VSSOP Package