OPA333AIDBVTG4 Datasheet PDF - TI

The OPA333AIDBVTG4 is a CMOS Operational Amplifier uses a proprietary auto-calibration technique to simultaneously provide very low offset voltage (10µV, maximum) and near-zero drift over time and temperature. This miniature, high-precision, low quiescent current amplifier offers high-impedance inputs that have a common-mode range 100 mV beyond the rails and rail-to-rail output that swings within 50mV of the rails. Single or dual supplies as low as +1.8V (±0.9V) and up to +5.5V (±2.75V) can be used. This device is optimized for low-voltage, single-supply operation. The OPA333AIDBVTG4 offers excellent CMRR without the crossover associated with traditional complementary input stages. This design results in superior performance for driving analogue-to-digital converters (ADCs) without degradation of differential linearity.

● 10µV Maximum low offset voltage

● 0.05µV/°C (maximum) Zero drift

● 1.1µVPP, 0.01 to 10Hz Noise

● 17µA Quiescent current

● Single-supply operation

● Rail-to-rail input/output

● Green product and no Sb/Br

●IC can be damaged by ESD. We recommend that all ICs be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.