| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Number of Pins | 7 Pin |
| Supply Voltage (DC) | 60.0 V |
| Operating Voltage | 8V ~ 60V |
| Case/Package | TO-220-7 |
| Supply Current | 10 mA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 1 Channel |
| Number of Positions | 7 Position |
| Common Mode Rejection Ratio | 80 dB |
| Input Offset Drift | 25.0 µV/K |
| Bandwidth | 1 MHz |
| Slew Rate | 6.00 V/μs |
| Gain Bandwidth Product | 1 MHz |
| Input Offset Voltage | 1 mV |
| Input Bias Current | 100 nA |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Gain Bandwidth | 1 MHz |
| Minimum CMRR Range | 80 dB |
| Supply Voltage (Max) | 60 V |
| Supply Voltage (Min) | 8 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 10.16 mm |
| Size-Width | 8.34 mm |
| Size-Height | 4.6 mm |
| Operating Temperature | -40℃ ~ 85℃ |
The OPA547T is a high-voltage or high-current Operational Amplifier ideal for driving a wide variety of loads. A laser-trimmed monolithic integrated circuit provides excellent low-level signal accuracy and high output voltage and current. The OPA547 operates from either single or dual supplies for design flexibility. In single-supply operation, the input common-mode range extends below ground. The OPA547 is internally protected against over-temperature conditions and current overloads. In addition, the OPA547 was designed to provide an accurate, user-selected current limit. The OPA547 senses the load indirectly, this allows the current limit to be adjusted from 0mA to 750mA with a 0 to 150µA control signal. This is easily done with a resistor or potentiometer or controlled digitally with a voltage-out or current-out DAC.
● 500mA Continuous high output current
● Wide output voltage swing
● Thermal shutdown and output current-limited fully protected
● Output disable control
● Thermal shutdown indicator
● Low quiescent current
● Green product and no Sb/Br
●This IC can be damaged by ESD. We recommend that all ICs be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
TI
High-Voltage (100V), High-Current (50mA) OPERATIONAL AMPLIFIERS, G = 1 Stable
Burr Brown
High-Voltage, High-Current OPERATIONAL AMPLIFIER
TI
BURR-BROWN OPA547T Operational Amplifier, Single, 1MHz, 1 Amplifier, 6V/s, 4V to 30V, TO-220, 7Pins
TI
Operational Amplifier, Single, 1 Amplifier, 1MHz, 6V/µs, ± 4V to ± 30V, TO-263, 7Pins
TI
TEXAS INSTRUMENTS OPA547F/500 Operational Amplifier, Single, 1 Amplifier, 1MHz, 6V/µs, ± 4V to ± 30V, TO-263, 7Pins
TI
TEXAS INSTRUMENTS OPA547T-1 Operational Amplifier, Single, 1 Amplifier, 1MHz, 6V/µs, 8V to 60V, TO-220, 7Pins
TI
TEXAS INSTRUMENTS OPA547F/500G3 Operational Amplifier, Single, 1 Amplifier, 1MHz, 6V/µs, ± 4V to ± 30V, TO-263, 7Pins
TI
TEXAS INSTRUMENTS OPA547FKTWTG3 Operational Amplifier, Single, 1 Amplifier, 1MHz, 6V/µs, ± 4V to ± 30V, TO-263, 7Pins
TI
OP Amp Single GP ±30V/60V 7Pin(7+Tab) TO-220 Tube
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
