| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Number of Pins | 11 Pin |
| Supply Voltage (DC) | 30.0 V |
| Operating Voltage | 8V ~ 60V |
| Case/Package | TO-220-11 |
| Supply Current | 26 mA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 1 Channel |
| Number of Positions | 11 Position |
| Common Mode Rejection Ratio | 80 dB |
| Input Offset Drift | 20.0 µV/K |
| Bandwidth | 900 kHz |
| Slew Rate | 9.00 V/μs |
| Gain Bandwidth Product | 900 kHz |
| Input Offset Voltage | 1 mV |
| Input Bias Current | 100 nA |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Gain Bandwidth | 0.9 MHz |
| Minimum CMRR Range | 80 dB |
| Supply Voltage | 8V ~ 60V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Operating Temperature | -40℃ ~ 85℃ |
The OPA549T is a high-voltage/high-current Operational Amplifier, ideal for driving a wide variety of loads. This laser-trimmed monolithic integrated circuit provides excellent low-level signal accuracy and high output voltage and current. The OPA549T operates from either single or dual supplies for design flexibility. The input common-mode range extends below the negative supply. The OPA549 is internally protected against over-temperature conditions and current overloads. In addition, the OPA549 provides an accurate, user-selected current limit. Unlike other designs which use a power resistor in series with the output current path, the OPA549T senses the load indirectly. This allows the current limit to be adjusted from 0 to 10A with a resistor/potentiometer or controlled digitally with a voltage-out or current-out digital-to-analogue Converter (DAC). The enable/status (E/S) pin provides two functions.
● 8A Continuous and 10A peak high output current
● Wide output voltage swing
● Thermal shutdown and adjustable current limit protection
● Output disable control
● Thermal shutdown indicator
● 9V/µs High slew rate
● Control reference pin
● Green product and no Sb/Br
●IC can be damaged by ESD. We recommend that all ICs be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
TI
High-Voltage (100V), High-Current (50mA) OPERATIONAL AMPLIFIERS, G = 1 Stable
TI
Operational Amplifier, Single, 1 Amplifier, 900kHz, 9V/µs, 8V to 60V, TO-220, 11Pins
TI
Operational Amplifier, Single, 1 Amplifier, 900kHz, 9V/µs, ± 4V to ± 30V, TO-220, 11Pins
TI
TEXAS INSTRUMENTS OPA549TG3 Operational Amplifier, Single, 1 Amplifier, 900kHz, 9V/µs, ± 4V to ± 30V, TO-220, 25Pins
TI
TEXAS INSTRUMENTS OPA549SG3 Operational Amplifier, Single, 1 Amplifier, 900kHz, 9V/µs, ± 4V to ± 30V, TO-220, 11Pins
TI
Op Amp Single GP ±30V/60V 11Pin(11+Tab) PFM Tray
Burr Brown
IC OPAMP POWER 900kHz 11PWRPACK
National Semiconductor
Operational Amplifier Single GP ±30V/60V 11Pin(11+Tab) TO-220
TI
HIGH-VOLTAGE, HIGH-CURRENT OPERATIONAL AMPLIFIER
TI
HIGH-VOLTAGE, HIGH-CURRENT OPERATIONAL AMPLIFIER
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
