| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 20 Pin |
| Supply Voltage (DC) | 16.0 V |
| Case/Package | HTSSOP-20 |
| Supply Current | 50 mA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 1 Channel |
| Number of Positions | 20 Position |
| Input Offset Drift | 50.0 µV/K |
| Bandwidth | 17 MHz |
| Slew Rate | 50.0 V/μs |
| Gain Bandwidth Product | 17 MHz |
| Input Offset Voltage | 1 mV |
| Input Bias Current | 10 pA |
| Operating Temperature (Max) | 125 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Gain Bandwidth | 17 MHz |
| Minimum CMRR Range | 70 dB |
| Supply Voltage (Max) | 16 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Not Recommended for New Designs |
| Packaging | Each |
| Size-Length | 6.5 mm |
| Size-Width | 4.4 mm |
| Size-Height | 1.15 mm |
| Operating Temperature | -40℃ ~ 125℃ |
The OPA561PWPG4 is a dual supply high current Operational Amplifier capable of driving up to 1.2A pulses into reactive loads. This monolithic integrated circuit provides high reliability in demanding line-carrier communications, laser diode drivers and motor control applications. The high slew rate provides 1MHz full-power bandwidth and excellent linearity. The OPA561 operates from dual power supplies of ±3.5 to ±7.5V for design flexibility. At maximum output current, a wide output swing provides a 12Vpp capability with a nominal 15V supply. The OPA561 is internally protected against over-temperature conditions and current overloads. In addition, the OPA561 is designed to provide an accurate, user-selected, current limit. The current limit can be adjusted from 0.2 to 1.2A with a low-power resistor/potentiometer or DAC (digital-to-analogue converter). The high-speed characteristics of the current control loop provide accuracy even under pulsed load conditions.
● Thermal shutdown, output current limited and fully protected
● Output disable control
● Green product and no Sb/Br
●This IC can be damaged by ESD. We recommend that all ICs be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
TI
the opa561 is a low-cost high-current operational amplifier capable of driving up to 1.2A pulses into reactive loads....
TI
Operational Amplifier, Single, 1 Amplifier, 17MHz, 50V/µs, ± 3.5V to ± 7.5V, TSSOP, 20Pins
TI
TEXAS INSTRUMENTS OPA561PWP/2K Audio Power Amplifier, 1Channel, ± 3.5V to ± 7.5V, HTSSOP, 20Pins
TI
TEXAS INSTRUMENTS OPA561PWPG4 Operational Amplifier, Single, 1 Amplifier, 17MHz, 50V/µs, ± 3.5V to ± 7.5V, HTSSOP, 20Pins
TI
OP Amp Single GP ±8V/16V 20Pin HTSSOP EP T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
