| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 20 Pin |
| Case/Package | HSOP-20 |
| Supply Current | 39 mA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 1 Channel |
| Common Mode Rejection Ratio | 70 dB |
| Input Offset Drift | 10.0 µV/K |
| Slew Rate | 40.0 V/μs |
| Gain Bandwidth Product | 17 MHz |
| Input Offset Voltage | 2 mV |
| Input Bias Current | 10 pA |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Gain Bandwidth | 17 MHz |
| Minimum CMRR Range | 70 dB |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Operating Temperature | -40℃ ~ 85℃ |
The large amount of gain, or amplification, produced by this general purpose amplifier OPA564AIDWD OP amp from Texas Instruments make it a commonly used component in nearly all electronics today. Its typical dual supply voltage is ±5|±9 V, with a minimum of ±3.5 V and maximum of ±12 V. This op amp has a minimum operating temperature of -40 °C and a maximum of 85 °C. It has a single channel per chip. This device uses one or two power supplies.
TI
1.5A, 24V, 17MHz, Power Operational Amplifier 20-SO PowerPAD -40℃ to 85℃
TI
1.5A, 24V, 17MHz, Power Operational Amplifier 20-SO PowerPAD -40℃ to 85℃
TI
1.5A, 24V, 17MHz, Power Operational Amplifier 20-SO PowerPAD -40℃ to 85℃
TI
1.5A, 24V, 17MHz, Power Operational Amplifier 20-HSOP -40℃ to 85℃
TI
1.5A, 24V, 17MHz, Power Operational Amplifier 20-HSOP -40℃ to 85℃
TI
Automotive 1.5A, 24V, 17MHz, Power Operational Amplifier 20-SO PowerPAD -40℃ to 125℃
TI
1.5A, 26V, 17MHz Power Operational Amplifier
TI
1.5A, 24V, 17MHz POWER OPERATIONAL AMPLIFIER
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
