TYPE | DESCRIPTION |
---|
Mounting Style | Through Hole |
Number of Pins | 8 Pin |
Operating Voltage | 10V ~ 36V |
Case/Package | PDIP-8 |
Supply Current | 6.5 mA |
Number of Circuits | 1 Circuit |
Number of Channels | 1 Channel |
Number of Positions | 8 Position |
Power Dissipation | 500 mW |
Common Mode Rejection Ratio | 80dB ~ 90dB |
Input Offset Drift | 3.00 µV/K |
Bandwidth | 13 MHz |
Slew Rate | 30.0 V/μs |
Gain Bandwidth Product | 12 MHz |
Input Offset Voltage | 300 µV |
Input Bias Current | 8 pA |
Operating Temperature (Max) | 70 ℃ |
Operating Temperature (Min) | 0 ℃ |
Gain Bandwidth | 12 MHz |
Power Dissipation (Max) | 500 mW |
Minimum CMRR Range | 78 dB |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Active |
Packaging | Tube |
Size-Length | 9.81 mm |
Size-Width | 6.35 mm |
Size-Height | 4.57 mm |
Operating Temperature | 0℃ ~ 70℃ |
The OPA606KP is a monolithic dielectrically-isolated FET (Difet®) Operational Amplifier features wider bandwidth and lower bias current than BIFET® LF156A amplifier. Bias current is specified under warmed-up and operating conditions, as opposed to a junction temperature of +25°C. Laser-trimmed thin-film resistors offer improved offset voltage and noise performance. The OPA606 is internally compensated for unity-gain stability.
● 10pA at TA=+25°C Maximum low bias current
● 500µV Maximum low offset voltage
● 0.0035% at 10kHz Typical low distortion
TI
The OPA606 is a wide-bandwidth monolithic dielectrically-isolated FET (Difet) operational amplifier featuring a wide...
Burr Brown
Wide-Bandwidth Difet OPERATIONAL AMPLIFIER
TI
Operational Amplifier, Single, 1 Amplifier, 13MHz, 30V/µs, ± 5V to ± 18V, DIP, 8Pins
TI
Operational Amplifier, Single, 1 Amplifier, 13MHz, 30V/µs, ± 5V to ± 18V, DIP, 8Pins
Burr Brown
Wide-Bandwidth Difet OPERATIONAL AMPLIFIER
Burr Brown
Wide-Bandwidth Difet OPERATIONAL AMPLIFIER
TI
IC OPAMP GP 12.5MHz SGL TO-99-8
TI
IC OPAMP GP 13MHz SGL TO-99-8
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.