| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Number of Pins | 8 Pin |
| Supply Voltage (DC) | 15.0 V |
| Case/Package | DIP-8 |
| Supply Current | 7 mA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 1 Channel |
| Number of Positions | 8 Position |
| Power Dissipation | 1000 mW |
| Common Mode Rejection Ratio | 100 dB |
| Input Offset Drift | 400 nV/K |
| Bandwidth | 16 MHz |
| Slew Rate | 55.0 V/μs |
| Gain Bandwidth Product | 16 MHz |
| Input Offset Voltage | 130 µV |
| Input Bias Current | 2 pA |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -25 ℃ |
| Gain Bandwidth | 16 MHz |
| Power Dissipation (Max) | 1000 mW |
| Minimum CMRR Range | 100 dB |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Each |
| Size-Length | 9.81 mm |
| Size-Width | 6.35 mm |
| Size-Height | 4.57 mm |
| Operating Temperature | -25℃ ~ 85℃ |
The OPA627APG4 is a precision high-speed Difet® Operational Amplifier provides a new level of performance in a precision FET operational amplifier. When compared to the popular OPA111 operational amplifier, the OPA6x7 has lower noise, lower offset voltage and higher speed. The OPA6x7 is useful in a broad range of precision and high speed analogue circuitry. The OPA6x7 is fabricated on a high-speed, dielectrically-isolated complementary NPN/PNP process. It operates over a wide range of power supply voltage of ±4.5 to ±18V. Laser-trimmed Difet input circuitry provides high accuracy and low-noise performance comparable with the best bipolar-input operational amplifiers. High frequency complementary transistors allow increased circuit bandwidth, attaining dynamic performance not possible with previous precision FET operational amplifiers. The OPA627 is unity-gain stable. The OPA637 is stable in gains equal to or greater than five.
● 4.5nV/√Hz at 10kHz Very low noise
● 550ns to 0.01% Fast setting time
● 100µV Maximum low VOS
● 0.8µV/°C Maximum low drift
● 5pA Maximum low IB
● Unity-gain stable
●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
TI
TEXAS INSTRUMENTS OPA627AU Operational Amplifier, Single, 1 Amplifier, 16MHz, 55V/µs, ± 4.5V to ± 18V, SOIC, 8Pins
TI
Operational Amplifier, Single, 1 Amplifier, 16MHz, 55V/µs, ± 4.5V to ± 18V, DIP, 8Pins
TI
TEXAS INSTRUMENTS OPA627AP Operational Amplifier, Single, 1 Amplifier, 16MHz, 55V/µs, ± 4.5V to ± 18V, DIP, 8Pins
TI
TEXAS INSTRUMENTS OPA627AU/2K5 Operational Amplifier, Single, 1 Amplifier, 16MHz, 55V/µs, ± 4.5V to ± 18V, SOIC, 8Pins
TI
Low Offset VoltagePrecision High-Speed Difet(R) Operational Amplifiers Op Amp Single GP ﾂｱ18V/36V 8Pin TO-99 Tube
TI
TEXAS INSTRUMENTS OPA627AM Operational Amplifier, Single, 1 Amplifier, 16MHz, 55V/µs, ± 4.5V to ± 18V, TO-99, 8Pins
TI
TEXAS INSTRUMENTS OPA627BM Operational Amplifier, Single, 1 Amplifier, 16MHz, 55V/µs, ± 4.5V to ± 18V, TO-99, 8Pins
TI
TEXAS INSTRUMENTS OPA627APG4 Operational Amplifier, Single, 1 Amplifier, 16MHz, 55V/µs, ± 4.5V to ± 18V, DIP, 8Pins
TI
TEXAS INSTRUMENTS OPA627AUE4 Operational Amplifier, Single, 1 Amplifier, 16MHz, 100V/µs, ± 4.5V to ± 18V, SOIC, 8Pins
TI
TEXAS INSTRUMENTS OPA627AUG4 Operational Amplifier, Single, 1 Amplifier, 16MHz, 55V/µs, ± 4.5V to ± 18V, SOIC, 8Pins
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
