General description
●The PCA9538A is a low-voltage 8-bit General Purpose Input/Output (GPIO) expander with interrupt and reset for I2C-bus/SMBus applications. NXP I/O expanders provide a simple solution when additional I/Os are needed while keeping interconnections to a minimum, for example, in ACPIpower switches, sensors, push buttons, LEDs, fan control, etc.
●In addition to providing a flexible set of GPIOs, the wide VDDrange of 1.65 V to 5.5 V allows the PCA9538A to interface with next-generation microprocessors and microcontrollers where supply levels are dropping down to conserve power.
●The PCA9538A contains the PCA9538A register set of four 8-bit Configuration, Input, Output, and Polarity Inversion registers.
●Features and benefits
● I2C-bus to parallel port expander
● Operating power supply voltage range of 1.65 V to 5.5 V
● Low standby current consumption:
● 1.5A (typical at 5 V VDD)
● 1.0A (typical at 3.3 V VDD)
● Schmitt-trigger action allows slow input transition and better switching noise immunity at the SCL and SDA inputs
● Vhys=0.10VDD(typical)
● 5 V tolerant I/Os
● Active LOW reset input (RESET)
● Open-drain active LOW interrupt output (INT)
● 400 kHz Fast-mode I2C-bus
● Internal power-on reset
● Power-up with all channels configured as inputs
● No glitch on power-up
● Latched outputs with 25 mA drive maximum capability for directly driving LEDs
● Latch-up performance exceeds 100 mA per JESD78, Class II
● ESD protection exceeds JESD22
● 2000 V Human Body Model (A114-A)
● 1000 V Charged-Device Model (C101)
● Packages offered: TSSOP16 and HVQFN16