PCA9538PW Datasheet PDF - NXP

The PCA9538PW is an 8-bit parallel Input/output (GPIO) Expander with interrupt and reset for I²C-bus/SMBus applications and was developed to enhance the NXP Semiconductors family of I²C-bus I/O expanders. The I/O expander provides a simple solution when additional I/O is needed for ACPI power switches, sensors, push-buttons, LEDs, fans, etc. It consists of an 8-bit configuration register (input or output selection), 8-bit input port register, 8-bit output port register and an 8-bit polarity inversion register (active HIGH or active LOW operation). The system master can enable the I/Os as either inputs or outputs by writing to the I/O configuration bits. The data for each input or output is kept in the corresponding input port or output port register. The polarity of the Input Port register can be inverted with the Polarity Inversion register. All registers can be read by the system master.

● Polarity inversion register

● Active low interrupt output

● Active low reset input

● Low standby current consumption

● Noise filter on SCL/SDA input

● No glitch on power-up

● Internal power-ON reset

● Latch-up testing is done to JEDEC standard JESD78 which exceeds 100mA