This 16-bit I/O expander for the two-line bidirectional bus (I2C) is designed for 2.5-V to 5.5-V VCC operation.
●The PCF8575 device provides general-purpose remote I/O expansion for most microcontroller families by way of the I2C interface [serial clock (SCL), serial data (SDA)].
●The device features a 16-bit quasi-bidirectional input/output (I/O) port (P07–P00, P17–P10), including latched outputs with high-current drive capability for directly driving LEDs. Each quasi-bidirectional I/O can be used as an input or output without the use of a data-direction control signal. At power on, the I/Os are high. In this mode, only a current source to VCC is active.
● I2C to Parallel-Port Expander
● Open-Drain Interrupt Output
● Low Standby-Current Consumption of 10 µA Max
● Compatible With Most Microcontrollers
● 400-kHz Fast I2C Bus
● Address by Three Hardware Address Pins for Use
●of up to Eight Devices
● Latched Outputs With High-Current Drive
●Capability for Directly Driving LEDs
● Current Source to VCC for Actively Driving a High
●at the Output
● Latch-Up Performance Exceeds 100 mA Per
●JESD 78, Class II
● ESD Protection Exceeds JESD 22
● 2000-V Human-Body Model
● 200-V Machine Model
● 1000-V Charged-Device Model
