Analog design is difficult and consumes precious development time. Microchip"s intelligent PIC® MCUs integrate analog functions such as high performance Analog-to-Digital Converters (ADCs), Digital-to-Analog Converters (DACs) and operational amplifiers (op amps) providing simple to use interfaces that ease analog design. This single-chip solution enables reduced system noise and provides higher throughput, while dramatically reducing design time and cost.
●Specifications:
● Enhanced Mid-Range Core with 49 Instruction, 16 Stack Levels
● Flash Program Memory with self read/write capability
● 256 Bytes of EEPROM
● Internal 32 Mhz oscillator
● 2 x PSMC (Programmable Switch Mode Controller) Dedicated 16-bit PWM
● Digital and/or analog feedback control of PWM frequency
● Dead-band control / auto-shutdown & restart
● 3 x Fast Comparators with selectable Voltage Reference
● 2 x Operation Amplifiers (rail-to-rail in and out)
● 11 x 12-bit ADC with Voltage Reference
● 8-bit DAC
● MI2C / SPI / EUSART w/auto baud
● 2 x Compare-Capture-PWM
● Four 8-bit Timer (TMR0/TMR2/TMR4/TMR6)
● One 16-bit Timer (TMR1)
● Extended Watchdog Timer (EWDT)
● Wide Operating Voltage Range: ‘F’ Version (2.3 V – 5.5 V)
● Low Power ‘LF’ variant (1.8 V – 3.6 V)
● 25 MA Source/Sink current I/O
● Enhanced Power-On/Off-Reset
● Brown-Out Reset (BOR)
● In Circuit Serial Programming (ICSP)
