DEVICE OVERVIEW
●The PIC16F707/PIC16LF707 devices are covered by this data sheet. They are available in 40/44-pin packages. Figure 1-1 shows a block diagram of the PIC16F707/PIC16LF707 devices. Table 1-1 shows the pinout descriptions.
●High-Performance RISC CPU:
●• Only 35 Single-Word Instructions to Learn:
● - All single-cycle instructions except branches
●• Operating Speed:
● - DC – 20 MHz clock input
● - DC – 200 ns instruction cycle
●• 8K x 14 Words of Flash Program Memory
●• 363 Bytes of Data Memory (SRAM)
●• Interrupt Capability
●• 8-Level Deep Hardware Stack
●• Direct, Indirect and Relative Addressing modes
●• Processor Read Access to Program Memory
●• Pinout Compatible to other 40-pin PIC16CXXX and PIC16FXXX Microcontrollers
●Special Microcontroller Features:
●• Precision Internal Oscillator:
● - 16 MHz or 500 kHz operation
● - Factory calibrated to ±1%, typical
● - Software selectable ÷1, ÷2, ÷4 or ÷8 divider
●• 31 kHz Low-Power Internal Oscillator
●• External Oscillator Block with:
● - 3 crystal/resonator modes up to 20 MHz
● - 3 external clock modes up to 20 MHz
●• Power-on Reset (POR)
●• Power-up Timer (PWRT)
●• Oscillator Start-Up Timer (OST)
●• Brown-out Reset (BOR):
● - Selectable between two trip points
● - Disabled in Sleep option
●• Watchdog Timer (WDT)
●• Programmable Code Protection
●• In-Circuit Serial Programming™ (ICSP™) via two pins
●• In-Circuit Debug (ICD) via Two Pins
●• Multiplexed Master Clear with Pull-up/Input Pin
●• Industrial and Extended Temperature Range
●• High-Endurance Flash Cell:
● - 1,000 Write Flash Endurance (typical)
● - Flash Retention: >40 years
● - Power-Saving Sleep mode
●• Operating Voltage Range:
● - 1.8V to 3.6V (PIC16LF707)
●• 1.8V to 5.5V (PIC16F707)
●Extreme Low-Power Management PIC16LF707 with nanoWatt XLP:
●• Sleep mode: 20 nA @ 1.8V, typical
●• Watchdog Timer: 500 nA @ 1.8V, typical
●• Timer1 Oscillator: 600 nA @ 1.8V, typical @ 32 kHz
●mTouch™ Technology Features:
●• Up to 32 Channels
●• Two Capacitive Sensing modules:
● - Acquire 2 samples simultaneously
●• Multiple Power modes:
● - Operation during Sleep
● - Proximity sensing with ultra low µA current
●• Adjustable Waveform Min. and Max. for Optimal Noise Performance
●• 1.8V to 5.5V Operation (3.6V max. for PIC16LF707)
●Analog Features:
●• A/D Converter:
● - 8-bit resolution and up to 14 channels
● - Conversion available during Sleep
● - Selectable 1.024V/2.048V/4.096V voltage reference
●• On-chip 3.2V Regulator (PIC16F707 device only)
●Peripheral Highlights:
●• Up to 35 I/O Pins and 1 Input-only Pin:
● - High current source/sink for direct LED drive
● - Interrupt-on-pin change
● - Individually programmable weak pull-ups
●• Timer0/A/B: 8-Bit Timer/Counter with 8-Bit Prescaler
●• Enhanced Timer1/3:
● - Dedicated low-power 32 kHz oscillator driver
● - 16-bit timer/counter with prescaler
● - External Gate Input mode with toggle and single shot modes
● - Interrupt-on-gate completion
●• Timer2: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler
●• Two Capture, Compare, PWM modules (CCP):
● - 16-bit Capture, max. resolution 12.5 ns
● - 16-bit Compare, max. resolution 200 ns
● - 10-bit PWM, max. frequency 20 kHz
●• Addressable Universal Synchronous
● Asynchronous Receiver Transmitter (AUSART)
