DEVICE OVERVIEW
●This document contains device-specific information for the following devices:
●• PIC18F24J50 • PIC18LF24J50
●• PIC18F25J50 • PIC18LF25J50
●• PIC18F26J50 • PIC18LF26J50
●• PIC18F44J50 • PIC18LF44J50
●• PIC18F45J50 • PIC18LF45J50
●• PIC18F46J50 • PIC18LF46J50
●This family introduces a new line of low-voltage Universal Serial Bus (USB) microcontrollers with the main traditional advantage of all PIC18 microcontrollers, namely, high computational performance and a rich feature set at an extremely competitive price point. These features make the PIC18F46J50 family a logical choice for many high-performance applications, where cost is a primary consideration.
●Power Management Features with nanoWatt XLP™ for Extreme Low-Power:
●• Deep Sleep mode: CPU off, Peripherals off, Currents Down to 13 nA and 850 nA with RTCC:
● - Able to wake-up on external triggers, programmable WDT or RTCC alarm
● - Ultra Low-Power Wake-up (ULPWU)
●• Sleep mode: CPU off, Peripherals off, SRAM on, Fast Wake-up, Currents Down to 105 nA, Typical
●• Idle: CPU off, Peripherals on, Currents Down to 2.3 A, Typical
●• Run: CPU on, Peripherals on, Currents Down to 6.2 A, Typical
●• Timer1 Oscillator w/RTCC: 1 A, 32 kHz, Typical
●• Watchdog Timer: 0.8 µA, 2V, Typical
●Special Microcontroller Features:
●• Low-Power, High-Speed CMOS Flash Technology
●• C Compiler Optimized Architecture for Re-Entrant Code
●• Priority Levels for Interrupts
●• Self-Programmable under Software Control
●• 8 x 8 Single-Cycle Hardware Multiplier
●• Extended Watchdog Timer (WDT):
● - Programmable period from 4 ms to 131s
●• Single-Supply In-Circuit Serial Programming™ (ICSP™) via two pins
●• In-Circuit Debug (ICD) w/Three Breakpoints via 2 Pins
●• Operating Voltage Range of 2.0V to 3.6V
●• On-Chip 2.5V Regulator
●• Flash Program Memory of 10,000 Erase/Write Cycles Minimum and 20-Year Data Retention
●Universal Serial Bus (USB) Features
●• USB V2.0 Compliant
●• Full Speed (12 Mbps) and Low Speed (1.5 Mbps)
●• Supports Control, Interrupt, Isochronous and Bulk Transfers
●• Supports up to 32 Endpoints (16 bidirectional)
●• USB module can use any RAM Location on the Device as USB Endpoint Buffers
●• On-Chip USB Transceiver with Crystal-less operation
●Flexible Oscillator Structure:
●• High-Precision Internal Oscillator (±0.15% typ.) for USB
●• Two External Clock modes, up to 48 MHz (12 MIPS)
●• Low-Power, 31 kHz Internal RC Oscillator
●• Tunable Internal Oscillator (31 kHz to 8 MHz, or up to 48 MHz with PLL)
●• Secondary Oscillator using Timer1 @ 32 kHz
●• Fail-Safe Clock Monitor:
● - Allows for safe shutdown if any clock stops
●• Two-Speed Oscillator Start-up
●• Programmable Reference Clock Output Generator
