The PIC32MX150F128B-I/SP is a 32-bit Microcontroller with audio and graphics interfaces, USB and advanced analog. The MIPS32® M4K® Processor Core is the heart of the PIC32MX1XX family processor. The CPU fetches instructions, decodes each instruction, fetches source operands, executes each instruction and writes the results of instruction execution to the proper destinations. The microcontroller provides 4GB unified virtual memory address space. All memory regions, including program, data memory, special function registers (SFRs) and configuration registers, reside in this address space at their respective unique addresses.
● 32-bit RISC CPU with less than 0.5mA/MHz current consumption
● Two I²S/SPI modules for Codec and serial communications
● Peripheral Pin Select (PPS) functionality
● Parallel Master Port (PMP) for graphics interfaces
● Up to 128kB flash memory (plus an additional 3kB of Boot Flash)
● Up to 32K SRAM memory
● 1.56 DMIPS/MHz (Dhrystone 2.1) performance
● MIPS32® M4K® core with MIPS16e® mode for up to 40% smaller code size
● Pin-compatible with most Microchip 16-bit devices
● Multiple power management modes
● Configurable WDT with on-chip low-power RC oscillator for reliable operation
● Up to 4 channels of hardware DMA with automatic data size detection
● Two UART and I²C™ modules
● Separate PLLs for CPU and USB clocks
● Hardware real-time clock and calendar (RTCC)
● Up to 13-channel, 10-bit ADC
● Three analog comparators
● Four programming and debugging interfaces
●ESD sensitive device, take proper precaution while handling the device.
