The PTH05000 series of non-isolated power modules are small in size and high on performance. Using double-sided surface mount construction and synchronous rectification technology, these regulators deliver up to 6 A of output current while occupying a PCB area of about half the size of a standard postage stamp. They are an ideal choice for applications where space, performance and cost are important design constraints.
●This series operates from an input voltage of 5-V to provide step-down power conversion to any output voltage over the range, 0.9 V to 3.6 V. The output voltage of the PTH05000W is set within this range using a single resistor.
●Operating features include an on/off inhibit, output voltage adjust (trim), output current limit, and over-temperature protection.
●For high efficiency these parts employ a synchronous rectifier output stage. An output pre-bias holdoff capability ensures that the output will not sink current during startup.
●Target applications include telecom, industrial, and general purpose circuits, including low-power dual-voltage systems that use a DSP, microprocessor, or ASIC.
●Package options include both through-hole and surface mount configurations.
● Up to 6-A Output Current
● 5-V Input Voltage
● Wide-Output Voltage Adjust (0.9 V to 3.6 V)
● Efficiencies up to 94%
● 160 W/in³ Power Density
● On/Off Inhibit
● Under-Voltage Lockout
● Output Current Limit
● Pre-Bias Startup Capability
● Over-Temperature Protection
● Surface Mountable
● Operating Temp: 40 to +85°C
● Safety Agency Approvals (Pending): UL 1950, CSA 22.2 950, EN60950 & VDE
