| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Frequency | 700 kHz |
| Number of Pins | 5 Pin |
| Supply Voltage (DC) | 5.50V (max) |
| Case/Package | DIP-5 |
| Power Rating | 21 W |
| Number of Outputs | 1 Output |
| Input Voltage (DC) | 5.50 V |
| Output Voltage | 0.9V ~ 3.6V |
| Output Current | 6 A |
| Number of Regulated Outputs | 1 Output |
| Topology | Buck |
| Input Voltage (Max) | 5.5 V |
| Input Voltage (Min) | 4.5 V |
| Input Voltage (DC Max) | 5.5 V |
| Input Voltage (DC Min) | 4.5 v |
| Output Voltage (Max) | 3.6 V |
| Output Voltage (Min) | 900 mV |
| Output Current (Max) | 6 A |
| Input Power (Max) | 21.6 W |
| Input Power (Max) | 21.6 W |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Input Voltage | 5 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tray |
| Size-Length | 18.92 mm |
| Size-Width | 12.57 mm |
| Size-Height | 8.5 mm |
| Operating Temperature | -40℃ ~ 85℃ |
The PTH05000WAH is a 1-output 21.6W through hole-mount non-isolated plug-in Power Module using double-sided surface mount construction and synchronous rectification technology, these regulators deliver up to 6A of output current while occupying a PCB area of about half the size of a standard postage stamp. They are an ideal choice for applications where space, performance and cost are important design constraints. This series operates from an input voltage of 5V to provide step-down power conversion to any output voltage over the range, 0.9 to 3.6V. The output voltage of the PTH05000W is set within this range using a single resistor. Operating features include an ON/OFF inhibit, output voltage adjust (trim), output current limit and over-temperature protection. For high efficiency these parts employ a synchronous rectifier output stage. An output pre-bias hold off capability ensures that the output will not sink current during start-up.
● Small size and high performance
● ON/OFF inhibit
● Under-voltage lockout
● Output current limit
● Pre-bias start-up capability
● Over-temperature protection
● Wide-output adjust
● 5V Input voltage
● Efficiencies up to 94%
● 160W/inch³ Power density
TI
Module DC-DC 5Vin 1Out 0.9V to 3.6V 6A 5Pin DIP Module
TI
Module DC-DC 5Vin 1Out 0.9V to 3.6V 6A 5Pin SMD Module
TI
Module DC-DC 5Vin 1Out 0.9V to 3.6V 6A 5Pin DIP Module
TI
Module DC-DC 5Vin 1Out 0.9V to 3.6V 6A 5Pin SMD Module
TI
Module DC-DC 5Vin 1Out 0.9V to 3.6V 6A 5Pin SMD Module T/R
TI
Module DC-DC 5Vin 1Out 0.9V to 3.6V 6A 5Pin SMD Module T/R
TI
6A, 5V Input Wide-Output Adjust Plug-in Power Module
National Semiconductor
Module DC to DC 1 Output 0.9V to 3.6V 6A 5Pin DIP Module
National Semiconductor
Module DC to DC 5VIN 1 Output 0.9 Volt to 3.6 Volt 6A 5-Pin Surface Mount Module
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
