General Description
●The RT9711A/B/C/D are cost-effective, low voltage, single N-MOSFET high-side power switches, optimized for self powered and bus-powered Universal Serial Bus (USB) applications. The RT9711 series are equipped with a charge pump circuitry to drive the internal MOSFET switch. The switch"s low RDS(ON), 80mΩ, meets USB voltage drop requirements. A flag output is available to indicate fault conditions to the local USB controller.
●Features
●Compliant to USB Specifications
●Built-In N-MOSFET
● Typical RDS(ON): 80mΩ (SOT-23-5 & TSOT-23-5) and 90mΩ (SOP-8 & MSOP-8)
●Output Can Be Forced Higher Than Input (Off-State)
●Low Supply Current :
● 25μA Typical at Switch On State
● 1μA Typical at Switch Off State
●Guaranteed 1.5A for RT9711A/B and 0.6A for RT9711C/D Continuous Load Current
●Wide Input Voltage Ranges : 2.5V to 5.5V
●Open-Drain Fault Flag Output
●Hot Plug-In Application (Soft-Start)
●1.7V Typical Under-Voltage Lockout (UVLO)
●Current Limiting Protection
●Thermal Shutdown Protection
●Reverse Current Flow Blocking (no body diode)
●Smallest SOT-23-5 and TSOT-23-5 Packages
●Minimizes Board Space
●UL Approved−E219878
●TUV IEC60950-1 : 2005Certified
●RoHS Compliant and 100% Lead (Pb)-Free
●Applications
●USB Bus/Self Powered Hubs
●USB Peripherals
●ACPI Power Distribution
●PC Card Hot Swap
●Notebook, Motherboard PCs
●Battery-Powered Equipment
●Hot-Plug Power Supplies
●Battery-Charger Circuits