| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Number of Pins | 8 Pin |
| Case/Package | PDIP-8 |
| Output Current | 32 mA |
| Supply Current | 1.1 mA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 1 Channel |
| Power Dissipation | 500 mW |
| Common Mode Rejection Ratio | 85 dB |
| Gain Bandwidth Product | 0.6 MHz |
| Input Offset Voltage | 400 µV |
| Input Bias Current | 40 nA |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Power Dissipation (Max) | 500 mW |
| Minimum CMRR Range | 85 dB |
| Supply Voltage (Max) | 15 V |
| Supply Voltage (Min) | 1.8 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Unknown |
| Packaging | Tube |
| Size-Length | 9.27 mm |
| Size-Width | 6.35 mm |
| Size-Height | 5.33 mm |
| Operating Temperature | -40℃ ~ 85℃ |
The NE5230 is a very low voltage operational amplifier that can perform with a voltage supply as low as 1.8 V or as high as 15 V. In addition, split or single supplies can be used, and the output will swing to ground when applying the latter. There is a bias adjusting pin which controls the supply current required by the device and thereby controls its power consumption. If the part is operated at ±0.9 V supply voltages, the current required is only 110 A when the current control pin is left open. Even with this low power consumption, the device obtains a typical unity gain bandwidth of 250 kHz. When the bias adjusting pin is connected to the negative supply, the unity gain bandwidth is typically 600 kHz while the supply current is increased to 600 A. In this mode, the part will supply full power output beyond the audio range.
●Features
●•Works Down to 1.8 V Supply Voltages
●•Adjustable Supply Current
●•Low Noise
●•Common−mode Includes Both Rails
●• VOUT With in 100 mV of Both Rails
●•Pb−Free Packages are Available
ON Semiconductor
18 Pages / 0.2 MByte
ON Semiconductor
22 Pages / 0.16 MByte
Philips
Low voltage operational amplifier
ON Semiconductor
Low voltage operational amplifier
ON Semiconductor
SA5230DG Low Voltage Op Amp, 250kHz, 1.8 - 15V, 8Pin SOIC
ON Semiconductor
SA Series 0.25V/us 18V SMT Low Voltage Operational Amplifier - SOIC-8
ON Semiconductor
OP Amp Single GP ±7.5V/15V 8Pin PDIP Rail
ON Semiconductor
Op Amp Single GP ±7.5V/15V 8Pin SOIC N T/R
ON Semiconductor
IC OPAMP GP 600kHz RRO 8DIP
ON Semiconductor
OP Amp Single GP ±7.5V/15V 8Pin SOIC N Rail
NXP
IC OPAMP GP 600kHz RRO 8SOIC
Philips
Low voltage operational amplifier
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
