Overview
●The SC18IM700 is designed to serve as an interface between the standard UART port of a microcontroller or microprocessor and the serial I²C-bus; this allows the microcontroller or microprocessor to communicate directly with other I²C-bus devices. The SC18IM700 can operate as an I²C-bus master. The SC18IM700 controls all the I²C-bus specific sequences, protocol, arbitration and timing. The host communicates with SC18IM700 with ASCII messages protocol; this makes the control sequences from the host to the SC18IM700 become very simple.
●MoreLess
●## Features
● UART host interface
● I²C-bus controller
● Eight programmable I/O pins
● High-speed UART: baud rate up to 460.8 kbit/s
● High-speed I²C-bus: 400 kbit/s
● 16-byte TX FIFO
● 16-byte RX FIFO
● Programmable baud rate generator
● 2.3 V and 3.6 V operation
● Sleep mode (power-down)
● UART message format resembles I²C-bus transaction format
● I²C-bus master functions
● Multi-master capability
● 5 V tolerance on the input pins
● 8 N 1 UART format (8 data bits, no parity bit, 1 stop bit)
● Available in very small TSSOP16 package
●## Features
