| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 8 Pin |
| Case/Package | SOIC-8 |
| Halogen Free Status | Halogen Free |
| Supply Current | 8 mA |
| Number of Circuits | 2 Circuit |
| Number of Channels | 2 Channel |
| Number of Positions | 8 Position |
| Power Dissipation | 0.78 W |
| Common Mode Rejection Ratio | 80 dB |
| Bandwidth | 10 MHz |
| Slew Rate | 9.00 V/μs |
| Gain Bandwidth Product | 10 MHz |
| Input Offset Voltage | 500 µV |
| Input Bias Current | 200 nA |
| Operating Temperature (Max) | 125 ℃ |
| Operating Temperature (Min) | -55 ℃ |
| Gain Bandwidth | 10 MHz |
| Power Dissipation (Max) | 780 mW |
| Minimum CMRR Range | 80 dB |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 5 mm |
| Size-Width | 4 mm |
| Size-Height | 1.5 mm |
| Operating Temperature | -55℃ ~ 125℃ |
The SE5532AD8G is an internally compensated high-performance low noise dual Operational Amplifier for use with control circuits. It shows better noise performance, improved output drive capability and considerably higher small-signal and power bandwidths. The op amp is internally compensated for gains equal to one. If very low noise is of prime importance, it is recommended that the 5532A version be used because it has guaranteed noise voltage specifications.
● Compensated for unity gain
● 600R, 10V RMS Output drive capability
● 5.0nV/√Hz (typical) Input noise voltage
● ±0.5V Differential input voltage
ON Semiconductor
10 Pages / 0.13 MByte
ON Semiconductor
10 Pages / 0.12 MByte
ON Semiconductor
3 Pages / 0.05 MByte
ON Semiconductor
11 Pages / 0.24 MByte
ON Semiconductor
2 Pages / 0.07 MByte
Philips
Internally-compensated dual low noise operational amplifier
ON Semiconductor
Operational Amplifier, Dual, 2 Amplifier, 10MHz, 9V/µs, ± 3V to ± 20V, SOIC, 8Pins
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
