SN65HVD3080EDGSG4 Datasheet PDF - TI

The SN65HVD3080EDGSG4 is a Low-power Driver/Receiver designed for full-duplex RS-485 or RS-422 data bus networks. Powered by a 5V supply, it is fully compliant with the TIA/EIA-485A standard. With controlled bus output transition times, the device is suitable for signalling rates from 200kbps to 20Mbps. The device is designed to operate with a low supply current, less than 1mA (typical), exclusive of the load. When in the inactive shutdown mode, the supply current drops to a few nanoamps, making this device ideal for power-sensitive applications. The wide common-mode range and high ESD protection levels of this device make them suitable for demanding applications such as motion controllers, electrical inverters, industrial networks and cabled chassis interconnects where noise tolerance is essential.

● Failsafe receiver (bus open, bus shorted and bus idle)

● Power-up and power-down glitch-free operation

● Low quiescent power - 375µA (typical) enabled mode and 2nA (typical) shutdown mode

● 1/8 Unit-load (up to 256 nodes on the bus)

● 16kV Bus-pin ESD protection, 6kV all pins

● Green product and no Sb/Br