These d-c triggered multivibrators feature output pulse-duration control by three methods. The basic pulse time is programmed by selection of external resistance and capacitance values (see typical application data). The "122 and "LS122 have internal timing resistors that allow the circuits to be used with only an external capacitor, if so desired. Once triggered, the basic pulse duration may be extended by retriggering the gated low-level-active (A) or high-level-active (B) inputs, or be reduced by use of the overriding clear. Figure 1 illustrates pulse control by retriggering and early clear.
●The "LS122 and "LS123 are provided enough Schmitt hysteresis to ensure jitter-free triggering from the B input with transition rates as slow as 0.1 millivolt per nanosecond.
●The Rint is nominally 10 k for "122 and "LS122.
● D-C Triggered from Active-High or Active-Low Gated Logic Inputs
● Retriggerable for Very Long Output Pulses, Up to 100% Duty Cycle
● Overriding Clear Terminates Output Pulse
● "122 and "LS122 Have Internal Timing Resistors
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
