SN74ABT16244ADGGR Datasheet PDF - TI

The SN74ABT16244ADGGR is a 16-bit Buffer/Driver designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers and bus-oriented receivers and transmitters. This device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer. This device provides true outputs and symmetrical OE inputs. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor, the minimum value of the resistor is determined by the current-sinking capability of the driver. The SN74ABT16244A is characterized for operation from -40 to 85°C.

● State-of-the-Art EPIC-IIB™ BiCMOS design significantly reduces power dissipation

● Distributed VCC and GND pin configuration minimizes high-speed switching noise

● Flow-through architecture optimizes PCB layout

● High-drive outputs

● Latch-up performance exceeds 500mA per JESD 70

● Typical VOLP (output ground bounce) <1V at VCC = 5V, TA = 25°C

● Green product and no Sb/Br