| TYPE | DESCRIPTION |
|---|
| Case/Package | SO-14 |
The SNx4AHC125 devices are quadruple bus buffer gates featuring independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE) input is high. When OE is low, the respective gate passes the data from the A input to its Y output.
●To ensure the high-impedance state during power up or power down, OE must be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
● Operating Range: 2 V to 5.5 V
● Latch-Up Performance Exceeds 250 mA Per JESD 17
● Four Individual Output Enable Pins
● All Inputs Have Schmitt-Trigger Action
TI
Buffer/Line Driver 1CH Non-Inverting 3-ST CMOS 5Pin SC-70 T/R
TI
Buffer/Line Driver 1CH Non-Inverting 3-ST CMOS 5Pin SOT-23 T/R
TI
Shift Register, HC Family, 74HC164, Serial to Parallel, 1Element, 8Bit, DIP, 14Pins
TI
Inverter, Schmitt Trigger, 74LVC1G14, 1Input, 32mA, 1.65V to 5.5V, SOT-23-5
TI
Inverter Schmitt Trigger 6Element CMOS 14Pin TSSOP Inverter Schmitt Trigger 6Element CMOS 14Pin TSSOP
TI
Buffer/Line Driver 8CH Non-Inverting 3-ST CMOS 20Pin TSSOP T/R
TI
Inverter, Schmitt Trigger, 74AHC1G14, 1Input, 8mA, 2V to 5.5V, SOT-23-5
TI
TEXAS INSTRUMENTS SN74LVC4245APWR Transceiver, Non-Inverting, 2.7V to 3.6V, 4.5V to 5.5V, TSSOP-24
TI
OR Gate 1Element 2IN CMOS 5Pin SOT-23 T/R
TI
Flip-Flop, Differential / Complementary, Positive Edge, 74LVC74, D, 4.1ns, 200MHz, 32mA, VSSOP
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
