TYPE | DESCRIPTION |
---|
Mounting Style | Surface Mount |
Number of Pins | 20 Pin |
Supply Voltage (DC) | 800mV ~ 2.70V |
Case/Package | BGA-20 |
Number of Outputs | 8 Output |
Number of Circuits | 8 Circuit |
Number of Bits | 8 Bit |
Propagation Delay Max (tpd) | 1.40 ns |
Static Current | 20.0 µA |
Output Current Drive | -1.00 mA |
Operating Temperature (Max) | 85 ℃ |
Operating Temperature (Min) | -40 ℃ |
Supply Voltage | 0.8V ~ 2.7V |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Active |
Packaging | Tape & Reel (TR) |
Size-Length | 4 mm |
Size-Width | 3 mm |
Size-Height | 0.75 mm |
Operating Temperature | -40℃ ~ 85℃ |
This octal bus transceiver is operational at 0.8-V to 2.7-V VCC, but is designed specifically for 1.65-V to 1.95-V VCC operation.
●The SN74AUC245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE)\ input can be used to disable the device so the buses are effectively isolated.
●To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
●This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
TI
this octal bus transceiver is operational at 0.8V to 2.7V vcc but is designed specifically for 1.65V to 1.95V vcc...
TI
Octal Bus Transceiver with 3-State Outputs 20-VQFN -40℃ to 85℃
TI
Octal Bus Transceiver with 3-State Outputs 20-BGA MICROSTAR JUNIOR -40℃ to 85℃
TI
Octal Bus Transceiver with 3-State Outputs 20-BGA MICROSTAR JUNIOR -40℃ to 85℃
TI
Octal Bus Transceiver with 3-State Outputs 20-VQFN -40℃ to 85℃
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.