● Available in the Texas Instruments NanoFree™ Package
● Optimized for 1.8-V Operation and Is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation
● Ioff Supports Partial-Power-Down Mode Operation
● Sub-1-V Operable
● Max tpd of 1.8 ns at 1.8 V
● Low Power Consumption, 10 µA at 1.8 V
● ±8-mA Output Drive at 1.8 V
● Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
● ESD Protection Exceeds JESD 22
● 2000-V Human-Body Model (A114-A)
● 200-V Machine Model (A115-A)
● 1000-V Charged-Device Model (C101)
●NanoFree is a trademark of Texas Instruments.
●## DESCRIPTION/ORDERING INFORMATION
●This dual bus buffer gate is operational at 0.8-V to 2.7-V VCC, but is designed specifically for 1.65-V to 1.95-V VCC operation.
●The SN74AUC2G125 features dual line drivers with 3-state outputs. The outputs are disabled when the associated output-enable (OE) input is high.
●NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package.
●To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
●This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
●For more information about AUC Little Logic devices, please refer to the TI application report, _Applications of Texas Instruments AUC Sub-1-V Little Logic Devices, _literature number SCEA027.
