● Available in the Texas Instruments NanoFree Package
● Optimized for 1.8-V Operation and Is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation
● Ioff Supports Partial-Power-Down Mode Operation
● Sub-1-V Operable
● Max tpd of 1.9 ns at 1.8 V
● Low Power Consumption, 10-µA Max ICC
● ±8-mA Output Drive at 1.8 V
● Latch-Up Performance Exceeds 100 mA Per
●JESD 78, Class II
● ESD Protection Exceeds JESD 22
● 2000-V Human-Body Model (A114-A)
● 200-V Machine Model (A115-A)
● 1000-V Charged-Device Model (C101)
●NanoFree is a trademark of Texas Instruments.
●## DESCRIPTION/ORDERING INFORMATION
●This dual positive-edge-triggered D-type flip-flop is operational at 0.8-V to 2.7-V VCC, but is designed specifically for 1.65-V to 1.95-V VCC operation.
●When data at the data (D) input meets the setup time requirement, the data is transferred to the Q output on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not related directly to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs.
●NanoFree package technology is a major breakthrough in IC packaging concepts, using the die as the package.
●This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
