| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Frequency | 90 MHz |
| Number of Pins | 8 Pin |
| Supply Voltage (DC) | -500 mV to 4.60 V |
| Case/Package | XFDFN-8 |
| Number of Outputs | 1 Output |
| Output Current | 4 mA |
| Number of Circuits | 1 Circuit |
| Number of Positions | 8 Position |
| Clock Speed | 100 MHz |
| Number of Bits | 1 Bit |
| Propagation Delay Max (tpd) | 2.00 ns |
| Input Capacitance | 1.5 pF |
| Number of Inputs | 1 Input |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Supply Voltage | 0.8V ~ 3.6V |
| Supply Voltage (Max) | 3.6 V |
| Supply Voltage (Min) | 0.8 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Size-Length | 1.45 mm |
| Size-Width | 1.05 mm |
| Size-Height | 0.35 mm |
| Operating Temperature | -40℃ ~ 85℃ (TA) |
Store state information by enabling this SN74AUP1G74DQER flip flop device from Texas Instruments. It has a differential output signal. This flip flop has a minimum operating temperature of -40 °C and a maximum of 85 °C. This product will be shipped in tape and reel packaging for quick mounting and safe delivery. This inverting/non-inverting device has a typical operating supply voltage of 1.8|2.5|3.3 V. Its minimum operating supply voltage of 0.8 V, while its maximum is 3.6 V. It has 1 channels per chip.
TI
Low-Power Single Positive-Edge-Triggered D-Type Flip-Flop
TI
TEXAS INSTRUMENTS SN74AUP1G74DCUR Flip-Flop, Complementary, Positive Edge, 74AUP1G74, D, 2ns, 200MHz, 20mA, VSSOP
TI
Flip Flop D-Type Pos-Edge 1Element 8Pin UQFN T/R
TI
TEXAS INSTRUMENTS SN74AUP1G74DQER Flip-Flop, D, 2ns, 90MHz, 4mA, QFN
TI
Flip Flop D-Type Pos-Edge 1Element 8Pin DSBGA T/R
TI
Flip Flop D-Type Pos-Edge 1Element 8Pin DSBGA T/R
TI
TEXAS INSTRUMENTS SN74AUP1G74DCURG4 Flip-Flop, Complementary, Differential, Positive Edge, 74AUP1G74, D, 2ns, 100MHz, 4mA, VSSOP
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
