The AUP family is TIs premier solution to the industrys low-power needs in battery-powered portable applications. This family ensures a very low static- and dynamic-power consumption across the entire VCC range of 0.8 V to 3.6 V, resulting in increased battery life (see Figure 1). This product also maintains excellent signal integrity (see Figure 2).
●This is a single positive-edge-triggered D-type flip-flop. When data at the data (D) input meets the setup time requirement, the data is transferred to the Q output on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not directly related to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs.
●NanoStar™ package technology is a major breakthrough in IC packaging concepts, using the die as the package.
●This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
● Available in the Texas Instruments NanoStar™ Package
● Low Static-Power Consumption
●(ICC = 0.9 µA Max)
● Low Dynamic-Power Consumption (Cpd = 4.3 pF Typ at 3.3 V)
● Low Input Capacitance (Ci = 1.5 pF Typ)
● Low Noise – Overshoot and Undershoot <10% of VCC
● Ioff Supports Partial-Power-Down Mode Operation
● Schmitt-Trigger Action Allows Slow Input Transition and Better Switching
●Noise Immunity at the Input
●(Vhys = 250 mV Typ at 3.3 V)
● Wide Operating VCC Range of 0.8 V to 3.6 V
● Optimized for 3.3-V Operation
● 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation
● tpd = 4.4 ns Max at 3.3 V
● Suitable for Point-to-Point Applications
● Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
● ESD Performance Tested Per JESD 22
● 2000-V Human-Body Model
●(A114-B, Class II)
● 1000-V Charged-Device Model (C101)
●NanoStar Is a trademark of Texas Instruments
